Be sure your shipment is fit to travel
Follow these simple tips to ensure your shipment is delivered to your customer in perfect condition:
- Use (new) boxes that are rigid, in a good condition (not damaged or wet) and do not tear easily. Used and damaged boxes lose their strengths which can damage your shipment.
- Ensure the box is large enough for the content. Items sticking out can get damaged. Sharp objects should be packed with extra care to avoid injure or damage.
- Protect (delicate) items with additional protection. Ship fragile products individually, wrapping them in a minimum 8-cm (3") thickness of air-cellular cushioning material such as Bubble Wrap®. Use cushioning material to cover the items as much as possible. This prevents the content from touching the box. Heavy items should have more protection and support.
- Use high-quality adhesive parcel tape or shrinkwrap to seal your parcel across all openings and strap tightly.
- Ensure the box can hold the weight of the content.
- If you are shipping heavy boxes above 25kgs, put a 'Heavy' mark on the box.
- Parcels above 34kgs (75lbs) should have a yellow and black safety label. Check the TNT catalogue for on how to get these.
- Place shipping labels on the top surface of the box. Do not cover them with tape or shrink wraps.
- The TNT barcodes have to be placed flat on the surface (not around the corner or partially covered).
- Remove old shipping labels or barcodes that were used for previous shipments.
- Include duplicate labels/consignment notes inside the box, in the event that address information on the box is missing.
- Items weighing 70kgs or above, should be put on a pallet for safety, ease of handling and protection
Use pallets that can be lifted by common forklifts.
- Be aware of the conditions of the pallets you use. Corrugated pallets are popular, but have to be water repellent in order to keep its strengths when getting wet.
- Ensure the pallet is not damaged or can cause injuries (no broken blocks or pins sticking out).
Ensure the boxes fit properly on the pallet and do not go beyond the dimensions of the pallet. Build a pallet that will ensure stability and strength.
- TNT will stack pallets. Build the pallets in order to be stackable (flat surface on the top).
- Avoid building 'pyramids'. This reduces the stability and strength.
- Secure the boxes and items using straps, shrinkwraps or crate constructions (Especially when shipping 'oddly' shaped items). Again, ensure stability of moving objects and be aware of safety for others!
- Indicate whether the pallet is stackable. Proper stacked pallets can bear up to five times their weight.
- Shipping labels of the pallet or boxes should be clearly visible (see boxes for more info)